***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 10:34 am


Board index » Official Resonator Forum

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
Ron Belanger
 Post subject: Spider Bridge insert
PostPosted: Sat Nov 14, 2009 7:59 pm 
Offline
Contributing Member
Contributing Member

Joined: Thu Dec 14, 2006 6:44 am
Posts: 319
Location: Canada
First name: Ron
Last Name: Belanger
Focus: Build
Status: Semi-pro
I am making a spider bridge saddle insert, maple with an ebony cap. What should the grain orientation, relative to the height of the insert, in the maple be? Verical? Horizontal? Diagonal?
I have cut some with the grain vertical and it seems to bend a little more than I think it should.
Any thoughts are welcome.
Top
 Profile  
 
JohnAbercrombie
 Post subject: Re: Spider Bridge insert
PostPosted: Sat Nov 14, 2009 10:33 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Ron-
I don't know if this will help, but fiddle bridges have the piece quarter-sawn- ie the grain lines run parallel to the soundboard.
Discussion and pic:
http://www.lutherie.net/grain.html


Cheers
John (with a reso body still not assembled, hardware in the drawer....)
Top
 Profile  
 
the Padma
 Post subject: Re: Spider Bridge insert
PostPosted: Sun Nov 15, 2009 12:03 am 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
JohnAbercrombie wrote:
Ron-
I don't know if this will help, but fiddle bridges have the piece quarter-sawn- ie the grain lines run parallel to the soundboard.
Discussion and pic:
http://www.lutherie.net/grain.html


Cheers
John (with a reso body still not assembled, hardware in the drawer....)




Ummm...John

Yes,
Violin family bridges are definatly quarter sawn.

But NO, the grain does not run parallel to the soundboard, it runs Perpendicular to the grain of the sound board.


Ron,

When you make the bridge out of perfect quartersawn stock...the end grain will show the layerd growth rings hoizontal to the deck of the instrument.

In reality one face of the bridge shuld be perfectly quartered to show the medullary rays, The other face will be slightly off quarter.

Blessings
the
Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.


.
Top
 Profile  
 
Ron Belanger
 Post subject: Re: Spider Bridge insert
PostPosted: Sun Nov 15, 2009 10:08 am 
Offline
Contributing Member
Contributing Member

Joined: Thu Dec 14, 2006 6:44 am
Posts: 319
Location: Canada
First name: Ron
Last Name: Belanger
Focus: Build
Status: Semi-pro
Thank you both for the replies. I really appreciate it. [:Y:]

Ron
Top
 Profile  
 
JohnAbercrombie
 Post subject: Re: Spider Bridge insert
PostPosted: Sun Nov 15, 2009 1:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
the Padma wrote:

Ummm...John

Yes,
Violin family bridges are definatly quarter sawn.

But NO, the grain does not run parallel to the soundboard, it runs Perpendicular to the grain of the sound board.


Huh?
Would it be clearer if I'd said 'parallel to the plane of the face of the soundboard'??

Looking at the pic in the link should clear this up.

Cheers
John


You do not have the required permissions to view the files attached to this post.

Top
 Profile  
 
the Padma
 Post subject: Re: Spider Bridge insert
PostPosted: Sun Nov 15, 2009 3:14 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 21, 2008 8:57 pm
Posts: 1982
Location: 8.33±0.35 kpc from Galactic center, 20 light-years above the equatorial in the Sol System
First name: duh
Last Name: Padma
City: Professional Sawdust Maker
Focus: Build
JohnAbercrombie wrote:
Huh?
Would it be clearer if I'd said 'parallel to the plane of the face of the soundboard'??

Looking at the pic in the link should clear this up.

Cheers
John



Ummm ... sorry John,

no it wouldn't.


Image


blessings
the
Padma

_________________
.

Audiences and dispensations on Thursdays ~ by appointment only.


.
Top
 Profile  
 
JohnAbercrombie
 Post subject: Re: Spider Bridge insert
PostPosted: Sun Nov 15, 2009 6:10 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur
Forget about the grain direction of the soundboard for a moment....
..."plane of the soundboard"...


Anyway, 'nuff said (in any font size)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 7 posts ] 

Board index » Official Resonator Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com